Negative pressure mold temperature machine

Mold automatic temperature control machine features  

The thermostat adopts Japanese and Italian (P.I.D.) touch mode internal storage, automatic calculation, accurate and reliable control within ± 2 ° C, saving more than 35%. Two-mode electric heating tubes can be used alone or together. Heating and cooling time is fast and the temperature is stable. Electric heating cylinder, etc. are made of stainless steel The safety protection and fault indication system is perfect. Imported advanced components are used for a long period of time. Japanese process system design, easy operation and maintenance

Device parameters:

Model Medium Maximum
temperature
Electrothermal
power
pump
power
Pump
flux
Pump
maximum
pressure
Cooling
mode
Outline
size
weight
Kw KW L/min Bar mm Kg
NTCW-9F water 95 9 0.75 60 6 Direct
cooling
1100*600*600 70
NTCW-12F water 95 12 0.75 60 6 Direct
cooling
1100*600*600 75
NTCW-18F water 95 18 1.5 90 6 Direct
cooling
1100*600*600 95
NTCW-24F water 95 24 1.5 90 6 Direct
cooling
1300*700*700 120
NTCO-9F Oil 150 9 0.75 60 6 Connect
cooling
1100*600*600 70
NTCO-12F Oil 150 12 0.75 60 6 Connect
cooling
1100*600*600 75
NTCO-18F Oil 150 18 1.5 90 6 Connect
cooling
1300*700*700 95
NTCO-24F Oil 150 24 1.5 90 6 Connect
cooling
1300*700*700 120
NTCO-9FH Oil 180 9 0.75+0.75 100 8 Connect
cooling
1400*700*700 110
NTCO-12FH Oil 180 12 0.75+0.75 100 8 Connect
cooling
1400*700*700 115
NTCO-18FH Oil 180 18 1.5+0.75 130 8 Connect
cooling
1400*700*700 150
NTCO-24FH Oil 180 24 1.5+0.75 130 8 Connect
cooling
1400*700*700 160

The above parameters are subject to change without notice.

产品展示

全力为中小企业提供网页设计、网站建设等店铺详情装修设计、平面设计、品牌推广等高度定制服务

muwenji_s
Skype
Home    Mould heater    Negative pressure mold temperature machine
本网站由阿里云提供云计算及安全服务 Powered by CloudDream